Posted in

How to agglomerate particles during spray drying?

If you’ve ever walked through a pharmaceutical manufacturing floor, a food processing plant, or a specialty chemical production facility, you’ve likely seen spray drying at work. This process turns liquid formulations—whether they’re a herbal extract, a biologic suspension, or a ceramic slurry—into free-flowing, consistent powder particles in a matter of seconds. But there’s a common hurdle every operator faces: agglomeration. For those new to spray drying, agglomeration might sound like a fancy industry buzzword, but it’s actually one of the most critical factors that determines whether your final product meets quality standards, works as intended, and is cost-effective to produce. As a spray dryer supplier with 18 years in the business, I’ve talked to hundreds of operators who’ve scrapped batches because their powder was too fine, too dusty, or not flowable enough—all because they couldn’t get agglomeration right. Today, I’m breaking down how to control particle agglomeration during spray drying, with real-world lessons I’ve learned working alongside teams every day. Spray Dryer

First, let’s get clear on what agglomeration actually is during spray drying, because it’s easy to mix up with other particle formation terms. When liquid feed enters a spray dryer, it’s atomized into tiny droplets. Those droplets get sprayed into a hot drying chamber, where the liquid evaporates, leaving solid particles. Agglomeration happens when these tiny primary particles stick together to form larger, more porous, free-flowing clusters, rather than staying as individual, tiny particles. The goal isn’t just to make bigger particles—it’s to make the right kind of agglomerates. For example, a powdered infant formula needs agglomerates that dissolve quickly in warm water; a pharmaceutical excipient needs agglomerates that flow easily through a capsule filler; and a powdered detergent needs agglomerates that don’t create a cloud of fine dust when poured. Too little agglomeration, and you’re left with a powdery, dusty product that’s hard to transport, prone to segregation, and can cause safety risks like worker inhalation. Too much, and your agglomerates are hard, dense, or uneven, failing dissolution or flow tests.

The good news is agglomeration during spray drying isn’t random. It’s controlled by three core levers: feed properties, spray dryer operating parameters, and atomization design. Let’s walk through each, with real examples from customer sites, because theory only works if it translates to your process.

First, feed properties are the foundation of agglomeration. The feed is the starting material, and small changes here have huge effects. Most operators focus on solid concentration in the feed, and for good reason. If your feed is too dilute (say, 10% solids by weight), the droplets sprayed into the chamber have very little solid material. When they dry, the primary particles are too small to stick together—they’ll either be lost to the exhaust air as fine dust or form weak, unstable clusters that break apart during handling. A customer who makes organic cocoa powder once told me they were running their feed at 12% solids and getting 25% fine particles in their final product; when they bumped the feed concentration to 18% (after testing their raw cocoa’s solubility to make sure it wouldn’t clump in the lines), the fine particle count dropped to 8%, and their agglomerates were large enough to flow through their packaging equipment. That said, don’t crank solids too high—if your feed is over 30% for many products, it can thicken in the atomizer or feed lines, causing uneven droplet size and inconsistent agglomerates.

Another often-overlooked feed property is the presence of binders or “sticky” solids. Binders are materials that don’t fully dry during the spray process, leaving a slightly tacky surface on primary particles that lets them stick together. For a lot of food and pharmaceutical products, the binder is already in the feed: things like maltodextrin, pectin, or hydroxypropyl methylcellulose (HPMC) act as natural binders. But if your product doesn’t have a natural binder, adding a small, controlled amount is key. I worked with a team making a powdered sports nutrition protein isolate a few years ago—they had a pure protein feed with no sticky components, so their agglomerates were tiny and dusty. We tested adding just 2% of hydrolyzed whey protein (a mild, compatible binder) to their feed, and within two batch runs, their final powder had a bulk density 30% higher, was nearly dust-free, and dissolved 2 minutes faster in water. The catch here is not overdoing it: too much binder can make agglomerates too dense, slow dissolution, or even change the taste of food products, or cause unwanted side effects in pharmaceuticals. Always test binder concentrations on a small scale first before adjusting your full process.

The second key lever is spray dryer operating parameters, specifically temperature and residence time. Temperature is tricky because it’s a balance between drying enough to get a stable powder and leaving just enough tack to let particles agglomerate. Most operators assume “hotter is drier,” but for agglomeration, that’s not always true. The hottest part of a spray dryer is the inlet air, right where the droplets enter. If inlet temperature is too high (for example, over 200°C for a heat-sensitive product like a live probiotic), the surface of the droplet will dry instantly, forming a hard, crusty shell before the inside has a chance to evaporate. When that happens, primary particles inside the shell can’t escape to stick to other particles, and you get hollow, fine, unstable particles. But if inlet temperature is too low (say, under 120°C for that same protein product), the droplets don’t dry completely before they hit the chamber walls, leading to wet clumps that stick together in large, uneven masses—think of cakey powder that’s hard to break apart.

I remember a herb extract customer who was struggling with this. Their inlet temperature was set at 195°C, and their powder was full of fine, dusty particles. We suggested lowering inlet temperature to 165°C, and adjusting outlet temperature to 78°C (instead of their original 85°C). The outlet temperature is just as important as inlet, by the way—it’s the temperature of the exhausted air, which tells you how dry the final particles are. By lowering the temperature, we left a tiny bit of residual moisture on the primary particles, so when they collided in the drying chamber, they stuck together to form solid agglomerates. The result was a powder that met their required 500 micron average particle size, with only 5% fines, and their packaging line ran 20% faster because the powder didn’t clog the feeder. Another part of operating parameters is the flow rate of the feed: if feed is pumped too fast, droplets are larger and have more time to collide; too slow, and they dry before colliding. It’s all about that balance.

Third, and often the most underrated lever, is atomization design. Atomization is the process of breaking the liquid feed into droplets, and it directly controls how often primary particles collide and agglomerate. There are three main atomization types used in spray drying: rotary, pressure nozzle, and two-fluid nozzle, and each works differently for agglomeration. Rotary atomizers spin a disc at high speed, flinging feed into droplets that are uniform in size. I always recommend rotary atomizers for agglomeration-focused processes, especially for larger particles, because the uniform droplet size means all particles dry at the same rate, so they have similar tack when they collide. A ceramic additive manufacturer we work with switched from a pressure nozzle atomizer to a rotary system two years ago—before, their pressure nozzle produced a mix of very small and very large droplets, so small particles dried too fast and large ones were still wet, leading to uneven agglomerates. With the rotary atomizer, their agglomerate size variation dropped by 40%, and their final ceramic powder had consistent packing density, which was critical for their customer’s injection molding process.

Pressure nozzle atomizers work by forcing feed through a small orifice at high pressure, and they’re cheaper than rotary for small-scale operations, but they’re harder to control for agglomeration because they produce more variable droplet sizes. Two-fluid nozzles use compressed air to break feed into droplets, and they’re great for very fine products, but they tend to produce smaller primary particles that are less likely to agglomerate. If you’re using pressure or two-fluid nozzles and struggling with agglomeration, adjusting the atomization pressure can help: slightly lowering pressure produces larger droplets, which have more surface area to collide and stick together, leading to bigger agglomerates.

Even after you tune feed, temperature, and atomization, there’s one final step that makes a huge difference: in-chamber and post-drying agglomeration aids. Some spray dryers are designed with what’s called a fluidized bed in the drying chamber, or integrated with a secondary fluid bed dryer/cooler. This lets agglomerates form after the initial drying step, as particles tumble in a moving, moist air environment, so they stick together more evenly. I worked with a powdered detergent manufacturer who was getting hard, uneven agglomerates from their standard spray drying process; adding an integrated fluid bed at the outlet of their spray dryer let the primary particles tumble for 10 minutes after they were mostly dry, forming soft, porous agglomerates that dissolved easily in water (something their detergent needed to do to avoid clumping in washing machines). For products that need even more control, post-drying agglomeration (sometimes called “compaction agglomeration) can be done in a separate mixer, but that adds cost—better to integrate it into the spray drying process if possible.

Now, let’s talk about common mistakes I see operators make, because even if you understand the levers, it’s easy to slip up. First, ignoring feed stability. If your feed is getting thick overnight in the feed tank, the particle size changes, so agglomeration the next run will be off. Always agitate the feed tank continuously, and filter the feed to remove any lumps that could clog atomizers and cause uneven droplets. Second, not testing on a pilot scale before scaling up. I’ve had customers come to me saying they set their full-scale spray dryer to parameters that worked on a lab unit, only to get bad agglomeration. Lab and pilot spray dryers are smaller, so droplet collision rates are different, and full-scale chambers have different air flow patterns. That’s why we recommend pilot testing before any full-scale investment—we often run those tests at our own facility, so customers can see exactly how agglomeration behaves with their specific product. Third, not considering end-use requirements first. A powdered coffee creamer needs very different agglomeration than a pharmaceutical tablet excipient. If you’re only focused on particle size and not on flowability or dissolution, you’ll make a powder that passes lab tests but fails at your packaging or end user.

At the end of the day, agglomeration during spray drying is about control—not forcing particles to stick, but guiding them to stick in the right way. As a spray dryer supplier, my job isn’t just to sell equipment; it’s to help operators hit their specific product targets, whether that’s dust reduction, flowability, dissolution, or bulk density. Whether you’re running a small pilot scale operation or a full production line, tuning feed properties, adjusting operating temperatures, choosing the right atomizer, and integrating post-drying aids will help you get the agglomeration you need.

If you’re struggling with inconsistent agglomeration in your spray drying process, or want to learn how to adjust your setup for your specific product, our team is here to help. We offer pilot testing, process audits, and customized solutions tailored to your needs—just reach out to discuss how we can optimize your spray drying operation.

Peptide Production References
Masters, K. (2002). Spray Drying Handbook (5th ed.). John Wiley & Sons.
Filková, L., & Štěpánek, F. (2014). Particle agglomeration in spray drying: A review. Drying Technology, 32(14), 1681-1702.
Jones, D., & Greenwood, D. (2018). Process parameters controlling agglomeration in spray drying of food products. Journal of Food Engineering, 229, 112-121.


Anyang Gaokang Medical Co., Ltd.
Anyang Gaokang Medical Co., Ltd. is one of the leading spray dryer manufacturers and suppliers in China. We warmly welcome you to buy high-grade spray dryer made in China here from our factory. All products are with high quality and competitive price.
Address: No.20, Guangming Road, Wenfeng District, Anyang, Henan, China
E-mail: Info@gaokangmedical-lab.com
WebSite: https://www.gaokbio.com/